View All Jobs
Lead / Senior Hardware Design Engineer
LTTS India
Bangalore
Job Description
Key Responsibilities
• Lead hardware design and development for ADAS, Cockpit, and Connectivity ECUs, from concept to production
• Design high-speed digital boards with advanced SoCs, DDR4/DDR5, LPDDR interfaces, PCIe, Ethernet (RGMII/SGMII/RMII/10G), USB, MIPI CSI/DSI, and SerDes.
• Perform schematic design, component selection, and BOM optimization ensuring automotive-grade reliability and cost efficiency.
• Conduct Signal Integrity (SI) and Power Integrity (PI) analysis for critical high-speed signals and power rails.
• Ensure ASIL-D compliance (ISO 26262) for safety-critical designs; participate in FMEA, FMEDA, and safety architecture reviews.
• Interface with camera, radar, LiDAR, and sensor fusion modules, ensuring signal quality, timing, and synchronization.
• Collaborate with PCB layout engineers for constraint-driven designs (impedance, stackup, crosstalk, EMI/EMC).
• Drive hardware validation and bring-up, including board-level testing, debugging, and root-cause analysis.
• Expertise in high-speed design (DDR4/5, PCIe, MIPI, Ethernet, USB 3.x, LVDS, SerDes).
• Experience with SI/PI analysis tools (e.g., HyperLynx, Sigrity, Ansys, Cadence).
• Knowledge of Automotive Safety (ISO 26262 - ASIL B to D compliance).
• Familiarity with EMI/EMC standards (CISPR 25, ISO 11452) and compliance testing.
• Understanding of thermal design, power sequencing, and power distribution.
• Experience in camera/radar interface and sensor fusion hardware design.
• Proficiency in schematic tools (Altium, Cadence Allegro, Mentor DxDesigner, Zuken CR8000).
• Hands-on experience with hardware bring-up, debugging, and lab instruments (oscilloscope, logic analyzer, power analyzer, etc.).
Mandatory Qualifications and Skills
• Proficiency with Altium, Cadence Allegro, Mentor DxDesigner or Zuken CR-8000.
• Strong hands-on experience in high-speed design, hardware bring-up and lab debugging.
• Knowledge of camera, radar, LiDAR and sensor-fusion hardware interfaces is preferred.
• Bachelor's degree in Electrical and Electronics Engineering, Electronics and Communication Engineering, or equivalent.
• Lead hardware design and development for ADAS, Cockpit, and Connectivity ECUs, from concept to production
• Design high-speed digital boards with advanced SoCs, DDR4/DDR5, LPDDR interfaces, PCIe, Ethernet (RGMII/SGMII/RMII/10G), USB, MIPI CSI/DSI, and SerDes.
• Perform schematic design, component selection, and BOM optimization ensuring automotive-grade reliability and cost efficiency.
• Conduct Signal Integrity (SI) and Power Integrity (PI) analysis for critical high-speed signals and power rails.
• Ensure ASIL-D compliance (ISO 26262) for safety-critical designs; participate in FMEA, FMEDA, and safety architecture reviews.
• Interface with camera, radar, LiDAR, and sensor fusion modules, ensuring signal quality, timing, and synchronization.
• Collaborate with PCB layout engineers for constraint-driven designs (impedance, stackup, crosstalk, EMI/EMC).
• Drive hardware validation and bring-up, including board-level testing, debugging, and root-cause analysis.
• Expertise in high-speed design (DDR4/5, PCIe, MIPI, Ethernet, USB 3.x, LVDS, SerDes).
• Experience with SI/PI analysis tools (e.g., HyperLynx, Sigrity, Ansys, Cadence).
• Knowledge of Automotive Safety (ISO 26262 - ASIL B to D compliance).
• Familiarity with EMI/EMC standards (CISPR 25, ISO 11452) and compliance testing.
• Understanding of thermal design, power sequencing, and power distribution.
• Experience in camera/radar interface and sensor fusion hardware design.
• Proficiency in schematic tools (Altium, Cadence Allegro, Mentor DxDesigner, Zuken CR8000).
• Hands-on experience with hardware bring-up, debugging, and lab instruments (oscilloscope, logic analyzer, power analyzer, etc.).
Mandatory Qualifications and Skills
• Proficiency with Altium, Cadence Allegro, Mentor DxDesigner or Zuken CR-8000.
• Strong hands-on experience in high-speed design, hardware bring-up and lab debugging.
• Knowledge of camera, radar, LiDAR and sensor-fusion hardware interfaces is preferred.
• Bachelor's degree in Electrical and Electronics Engineering, Electronics and Communication Engineering, or equivalent.
Job Requirement
ADAS