Join our talent pool by simply submitting your resume. We’ll inform you about the new jobs matching your profile and update you if you are the best fit for one of our open positions.

Join Talent Pool

Job Description & Skill Requirement:  'Key Responsibilities: Manufacturing Process Quality Analyze manufacturing process defects across hull, deck, assembly, finishing, and installation stages. Lead root cause analysis (RCA) for recurring and critical quality issues. Identify and implement quick win corrective actions to reduce defects, rework, and scrap. Improve process robustness through standard work, control plans, and SOP updates. Conduct process audits and line audits to ensure adherence to quality standards. Dealer & Packaging Quality Investigate dealer-side quality issues, especially packaging, handling, and transit damage. Perform packaging defect analysis and recommend design or process changes. Collaborate with logistics, packaging suppliers, and dealers to eliminate repeat failures. Develop damage prevention solutions for transportation and dealer handling. Support dealers with quality guidelines, training, and corrective actions. Problem Solving & Continuous Improvement Lead structured problem-solving using 8D, 5 Why, Fishbone, and PDCA. Track and verify effectiveness of corrective and preventive actions (CAPA). Drive continuous improvement initiatives focused on defect reduction and customer satisfaction. Implement and monitor quality KPIs, Pareto charts, and trend reports. Cross-Functional & System Responsibilities Work closely with manufacturing, engineering, procurement, logistics, and dealers. Support quality system compliance (ISO 9001 or equivalent). Maintain accurate quality records, reports, and documentation. Participate in supplier quality improvement activities if required. Desired Skills & Experience: Strong experience in manufacturing or marine/boat industry quality engineering. Hands-on expertise in root cause analysis and quick win implementation. Solid knowledge of process quality, packaging quality, and dealer-related defects. Ability to work on the shopfloor and at dealer sites. Working knowledge of ISO 9001 Quality Management Systems. Proficiency in Excel, basic data analysis, and quality reporting tools.   Qualification Bachelor's degree in Industrial / Manufacturing / Production Engineering "LTTS is an Equal Opportunity Employer and maintains a clear policy against discrimination based on age, disability, sex, race, religion or belief, gender reassignment, marriage/civil partnership, pregnancy/maternity, or sexual orientation. As an inclusive organization, we actively endorse equal opportunities for all candidates with the right mix of talent, skills, and potential. We encourage applications from a diverse pool of candidates and selection for roles will solely be based on individual merit." "L&T Technology Services LTD is an equal opportunity employer and is committed to providing reasonable accommodations to qualified individuals with disabilities. If you require any accommodations to participate in the recruitment process or to perform the essential functions of the job, please let us know. We will work with you to provide reasonable accommodations in accordance with applicable law."

Vonore (CSLS0275), Tennessee

Quality Engineer

Job Description & Skill Requirement:  1) Min 10 yrs experience in Automotive SW development with min 5 yrs in Telematics 2) Experience in platform SW areas - BSP, MW, Drivers, Linux,  Network-Ethernet & CANFD, Diagnostics) 3) Experience in Qualcomm Micro processors 4) Experience in multiple interfaces - Ethernet Switch, Audio, A2B, Wi-Fi, Bluetooth, GNSS, V2X, 5G Modems  Qualification BE "LTTS is an Equal Opportunity Employer and maintains a clear policy against discrimination based on age, disability, sex, race, religion or belief, gender reassignment, marriage/civil partnership, pregnancy/maternity, or sexual orientation. As an inclusive organization, we actively endorse equal opportunities for all candidates with the right mix of talent, skills, and potential. We encourage applications from a diverse pool of candidates and selection for roles will solely be based on individual merit." "L&T Technology Services LTD is an equal opportunity employer and is committed to providing reasonable accommodations to qualified individuals with disabilities. If you require any accommodations to participate in the recruitment process or to perform the essential functions of the job, please let us know. We will work with you to provide reasonable accommodations in accordance with applicable law."

Mountain View, California

Telematics Platform SW Lead-NAD (Network Application Processor)

Job Description & Skill Requirement: 1) Min 10 yrs experience in Automotive SW development with min 5 yrs in Infotainment 2) Experience in platform SW areas - BSP, MW, Drivers, Linux, QNX, Android, Hypervisor, Network-Ethernet & CANFD, Diagnostics 3) Experience in Qualcomm Micro processors 4) Experience in multiple interfaces - Tuner, Ethernet switch, Audio, A2B, GMSL, Wi-Fi, Bluetooth, GNSS, Qualification •	BE "LTTS is an Equal Opportunity Employer and maintains a clear policy against discrimination based on age, disability, sex, race, religion or belief, gender reassignment, marriage/civil partnership, pregnancy/maternity, or sexual orientation. As an inclusive organization, we actively endorse equal opportunities for all candidates with the right mix of talent, skills, and potential. We encourage applications from a diverse pool of candidates and selection for roles will solely be based on individual merit." "L&T Technology Services LTD is an equal opportunity employer and is committed to providing reasonable accommodations to qualified individuals with disabilities. If you require any accommodations to participate in the recruitment process or to perform the essential functions of the job, please let us know. We will work with you to provide reasonable accommodations in accordance with applicable law."

Infotainment Platform SW Lead-Qualcomm Processor

Job Description & Skill Requirement: 1.	Embedded C with Low level Sw skills 2.	Communication interfaces - I2C, SPI, UART, Ethernat, CAN 3.	Ability to read and understand HW schematics and debug on HW boards 4.	Linux environment and scripts(for debugging communication interface between IOC and SOC) 5.	Onsite at MTV, immediate need 6.	Desirable - Aurix, FreeRTOS, Autosar knowledge, 7.	Note - product uses OpenBSW(supplied by Accenture, non-Autoar) 8.	Even non-Automotive will work Qualification •	BE "LTTS is an Equal Opportunity Employer and maintains a clear policy against discrimination based on age, disability, sex, race, religion or belief, gender reassignment, marriage/civil partnership, pregnancy/maternity, or sexual orientation. As an inclusive organization, we actively endorse equal opportunities for all candidates with the right mix of talent, skills, and potential. We encourage applications from a diverse pool of candidates and selection for roles will solely be based on individual merit." "L&T Technology Services LTD is an equal opportunity employer and is committed to providing reasonable accommodations to qualified individuals with disabilities. If you require any accommodations to participate in the recruitment process or to perform the essential functions of the job, please let us know. We will work with you to provide reasonable accommodations in accordance with applicable law."

Embedded SW Developer

Job Description & Skill Requirement: SKILLS: •	A working knowledge of common machine shop techniques. •	Proficient in Pick & Place design •	Proficient in Bowl feeder selection •	Proficient in high speed automation line design •	Proficient in Sensor selection •	Proficient in Material handeling equipments & SPM •	Proficient in Conveyor design •	Proficient in stand part selection(like LM Guide, servo motors,etc) •	Proficient in Material selection •	Must have a thorough knowledge of drafting principles. •	Must be proficient in AutoCAD and Solid Works. •	Must be capable of designing tooling from sketches or verbal concepts. •	Must be capable of working as part of a team and able to manage 15 offshore team •	A thorough knowledge of the use of pneumatics and hydraulics. •	A thorough knowledge of the use of electrical devices (i.e. switches, load cells, LVDT's, etc.). •	Must be capable of giving and taking direction. •	Must demonstrate a strong ability to conceptualize and create solutions for complex design requirements. •	Must have strong written and oral communication abilities. •	Able to independently complete all specific responsibilities with minimal supervision. •	Able to handle 10-12 team member •	Able to co-ordinate with Onsite offshore •	Project Management experiance SPECIFIC RESPONSIBILITIES: •	Perform engineering calculations with respect to strength of materials, speeds, horsepower, temperature, pressure, force, etc. as related to machine and tool designs. •	Analyzes engineering drawings, and specifications to determine shape, dimensions, hardness etc. in the development of equipment, processes and products. •	Examines feasibility of using one or more machines to carry out sequential operations. •	Produces working drawings, detail drawings and bills of materials for equipment, sub-assemblies or product, using AutoCAD and Solid Works. •	Analyze designs and systems for compliance to applicable standards (i.e. OSHA, CE or customer specific) •	Review drawings for accuracy, material selection, proper machining techniques, finishes, hardness, etc.Will liaise with customers and in-house technical and engineering staff. •	Will liaise with vendors for technical information and specifications. •	Adhere to all health and safety rules and procedures. •	Adhere to all ISO procedures pertaining to the job responsibilities. •	Responsible for communicating progress on tasks to supervising designer. •	Will periodically supervise the mechanical design effort on a project level delegating tasks to a team of people. •	Organize documentation, including quotes, drawing registers, correspondence, requisitions, drawings, schedules, etc. on projects you are supervising. •	Responsible for communicating time estimates and resource requirements on design tasks to the Director, Mechanical Design and Project managers.Review electrical requirements with respect to input and output devises with electrical designers. •	Review machine operations and machine sequences with programmers. •	Assist the fabricators, machinists, toolmaker and electricians in the debug, integration resolving problems and completion of systems. •	Determines tools, fixtures and equipment to be used in fabrication and assembly of mechanical components and complete assemblies. •	Select appropriate purchase component for mechanical assemblies and create requisitions with appropriate delivery dates. •	Examines project instructions and drawings to determine test specifications, procedures, objectives, test equipment and problems involved in designing, changing or re-arranging materials. •	Will assist in developing design and department standards.

Cambridge (CSLS1212), Ontario

Senior Automation Designer - Mechanical

	Board bring up 	Knowledge on PCB design (layout and routing) 	Signal integrity and power integrity analysis 	EMI/EMC compliance understanding 	Hardware debugging and troubleshooting 	Experience with test equipment (oscilloscopes, multimeters, logic analyzers) 	Knowledge of design for testability (DFT) 	Thermal and mechanical considerations in hardware design 	Documentation and reporting skills 	Understanding of verification and validation processes 	Component selections 	DO-254 standard

Bangalore (LOC1015)

Senior Engineer

Technical Requirements RF T&M Instruments Analog & Mixed-signal Testing Instruments and Software Scripting knowledge (Python. C-shell/Perl, MATLAB, LabView etc.) Key Duties and Responsibilities 1. RF DUT Testing, System level characterization for Stability, Noise Figure (NF), Gain & Linearity (P1dB), Intermods (IM3/IIP3), ACLPR, EVM, CCDF, Rx. Sensitivity, Thermal Chamber Testing and S-parameter characterization. 2. 3GPP TS Series 36/37/38 and O-RAN qualification fundamentals for 5G-NR and NGN products. 3. Able to independently work on T&M infra, Testing & qualification documentation, and component qualification for power derating related analysis and documentation. 4. Prepare test specifications and test procedures and develop test fixtures. 5. DVT, SVT, RCT and End-to-End testing for RF/Wireless products using Keysight, R&S and Anritsu T&M (VSG/VSA/VNA and Samling Oscilloscopes etc.) including O-RAN Studio, MIMO suites etc. 6. S-parameter measurements, noise figure and linearity measurements related activities. 7. Hands-on experience with DU Emulator and MIMO related validation would be an added advantage. 8. Assist in PA, LNA and other RF Active/Passive components (Duplexers/Filters, Power Dividers/ Combiners, Switches, Directional Couplers, and Attenuators/Splitters etc.) testing and validate to verify regulatory and performance targets. 9. Collaborate with senior engineers/team-lead on RF testing and performance tuning more focused for design verification test for Target power, EVM, Sensitivity and Spurious etc for TX/RX/ORX chains.

Chennai (LOC1017)

Engineer

knowledge on embedded hardware design cycle good experience in high speed hardware design experience in silicon validaiton good in high speed memoreis and itnerfaces knowledge good in electrical validaiton and interface compliance validation good in Power and performance validation •	UCIe (Universal Chiplet Interconnect Express) - We should double down on UCIe end-to-end offering: spec compliance, interoperability lab, die-to-die PHY integration. •	Ethernet 800G / 1.6T (SerDes 112G → 224G) - PHY verification, DSP pipeline modeling, compliance automation. And on Memory front, HBM/CXL are hot topics these days and hope we are preparing ourselves on these technology areas as well. •	HBM3E and HBM4 PHY + integration support - Provide package, SI/PI modeling •	DDR6 / LPDDR6 •	GDDR7 validation - High-speed PHY, thermal/power analysis.

Hardware Design and IO Compliance validation Engineer

RF System Engineer: •	5 to 7 years of relevant experience. Description: •	Working with high frequency systems •	Creating system and module levels specs for passive & active components to meet system specification •	PHY validation, defining and writing test plans and test procedures for new chips, systems and features. •	Building test setups and performing manual and automatic tests. •	Defining & writing Automatic tests & drivers. •	Recording, investigating and analyzing defects. Requirements: •	Definition and execution of system tests associated with RF/baseband/PHY/Modem performance •	Good Understanding of RF Transmit & Receive chain •	Good experience of working with RF systems involving modulations like OFDM, 1024QAM •	Knowledge in operating RF Test Equipment (Spectrum Analyzer, Signal Generator, Power Meter, Network Analyzer) •	Knowledge and experience in digital communication (IQ modulation-QAM, DPD, AGC, EVM, etc.) •	Deep dive debugging into the system with emphasis on RF, HW and PHY aspects •	Excellent engineering skills - problem solving, pragmatic approach, broad system view •	Knowledge and experience in RF chains (NF, IP3, RL, Super Heterodyne receivers, etc.) •	Thorough understanding of Wireless communication systems. •	Ability to work well in multi-team environment

RF Engineer

Job Description & Skill Requirement: Responsibilities: •	Develop, test, troubleshoot, modify, and commission Allen Bradley PLC (CompactLogix) control system applications using RSLogix. •	Develop, test, troubleshoot, modify, and commission SCADA and GE Proficy HMI/SCADA (iFIX) control system applications. •	Specify and purchase control system hardware and instrumentation. •	Read, understand, develop, and modify control system design documents including diagrams, drawings (P&ID, control system schematics, wiring drawings, I/O lists, pneumatic and hydraulic drawings, etc.) and written design specifications (Functional Specifications, Users Manuals, Sequence of Operations, etc.). •	Produce GAMP documentation including, but not limited to, Functional Specifications (FS), Hardware Design Specifications (HDS), and Software Design Specifications (SDS) as required by project specifications. •	Develop, modify, and configure PC based relational databases. •	Develop and install control systems in a cost effective and timely manner in accordance with project schedules, budgets, customer requirements, and equipment specifications. •	Report on and/or present progress and status of projects and assignments in various formats to internal and external audiences. •	Perform value analysis and sustaining engineering tasks, and product improvement designs to enhance manufacturability, productivity, reliability, safety, quality, and cost effectiveness. •	Aid Technical Support and Service personnel. •	Some travel to other SP facilities, vendors, or customer sites may be necessary. Some travel may be foreign. Qualification: •	Bachelor's degree in electrical engineering or a related field. •	Minimum of 8-10 years in a leadership role within automation engineering, preferably in the pharmaceutical or related industry. •	Strong project management skills with a track record of successful project delivery. •	Knowledge of automation technologies, Allen Bradley PLCs and I/O, Siemens PLCS and I/O, GE iFIX SCADA systems, FactoryTalk View ME HMIs, and industrial communication protocols. •	Software: Studio5000, FactoryTalk View ME, Siemens TIA Portal. •	Familiarity with regulatory requirements and standards in the pharmaceutical industry. •	Computer skills to include Microsoft Office products- Word, Excel, PowerPoint, and Project. •	Experience with capital equipment or engineered-to-order products is required. •	Experience with validation procedures and change-control practices relating to control system development and modification is a plus. •	Experience with controls validation and change-control procedures within an FDA regulated environment is a plus. •	Experience with computer-based Bills of Material and Inventory Control processes and MRP is a plus. •	Experience with systems integration involving multiple vendors is a plus. •	Experience with refrigeration systems control is a plus. •	Experience designing, troubleshooting IP networks •	Must have good troubleshooting skills. •	Excellent interpersonal and communication skills, with the ability to collaborate effectively with cross-functional teams. Qualification: •	Bachelor's degree in electrical engineering or a related field. •	Minimum of 8-10 years in a leadership role within automation engineering, preferably in the pharmaceutical or related industry.

Horsham, Pennsylvania

Control System Engineer

<div style="">L&amp;T Technology Services Limited (LTTS) is a global leader in Engineering and R&amp;D (ER&amp;D) services. With 1,249 patents filed &amp; 105 innovation and R&amp;D design centers for 57 of the Global Top 100 ER&amp;D spenders, LTTS lives and breathes engineering. Our innovations speak for themselves – World’s 1st Autonomous Welding Robot, Solar ‘Connectivity’ Drone, and the Smartest Campus in the World, to name a few.</div><div style=""> </div><div style="">LTTS’ expertise in engineering design, product development, smart manufacturing, and digitalization touches every area of human lives - from the moment one wakes up till the time one goes to bed. With 105 Innovation and R&amp;D design centers globally, we specialize in disruptive technology spaces such as 5G, Artificial Intelligence, Collaborative Robots, Digital Factory, and Autonomous Transport.</div><div style=""> </div><div style="">LTTS is a publicly listed subsidiary of <a href="http://www.larsentoubro.com/">Larsen &amp; Toubro Limited</a>, the $21 billion Indian conglomerate operating in over 30 countries.</div><div style=""> </div><div style="">For further details please visit our LTTS Website.&nbsp;</div><div style=""> </div><div style="">URL: https://www.ltts.com/about-us/company-profile</div>